| Question | How can I get access to the web interface of the IPline AX ? |
| Answer | Enter the browser https//192.168.1.2/ipline and login as admin, password ipline URGENT!! use https for SSL (ip assign by your dhcp server)
|
Question
| How can I change the ip address of my pbx ? |
Answer
| Please find these and many more help in the howto, also in german issue |
| Question | It is possible to use the second ethernet interface ? |
| Answer | Yes, the IPline AX will startup with two ethernet interfaces, eth0 is dhcp by default
to enable the second (eth1) enter the command i.e. ifconfig eth1 1.0.0.1 |
| Question | I would use my fax connect to ATA as a extension on the pbx, should works ? |
| Answer | Yes, we recommend to use T.38 capable ATA
|
| Question | After I changed the IP address, I do not have access any more |
| Answer | plug a serial cable to the RS-232 9-pin port of the pbx and the other end to your
serial port on your computer, use hyperterminal and open new connection, select the appropriate com port, set the speed to 19200 bps, login as root, password astlinux
enter following commands- mount -o rw,remount /
- cp /mnt/opt/rc.conf /stat/etc/rc.conf
- mount -o ro,remount /
reboot the unit
now by default dhcp is anabled |
| Question | I forget my password, how can I recover the login to web interface of my pbx ? |
| Answer | login as root within ssh or take the above faq answer using serial port
then enter the command # htpasswd /stat/var/www/admin/.htpasswd admin
New password is asking, enter your new password two times, logon within browser again |
| Question | I cannot select an option on info service No. 164, key input are all ignored by the snom phone |
| Answer | Set option in your snom web configure interface, click advanced and select "DTMF Payload Type:" edit the payload type in the field to 'a=fmtp:101 0-16' |
| Question | Where can I find the various asterisk application commands, like exten => Dial(..) ? |
| Answer | Approximately more then 165 commands on wiki.astripedia.org |
| Question | How to initiate call transfer on my voip phone ?
|
| Answer | The following link describes how to producing call transfer for most used practices http://wiki.snom.com/Functions/Call/Call_Transfer
|
| Question | What mean the return messages like 600 Busy or 404 Not Found ?
|
| Answer | Here you will find all sip code explanation follow the link SIP Return Codes
|
| Question | How can I find the current ip of snom m3 phone ?
|
| Answer | Press the volume up key to get the ip address, default user admin, password admin
|
